Meet the Makers - Model Display Table 4

Table 4 - Place 1

Model Owner: Lindsay Muxlow

Model Builder: Lindsay Muxlow

Vessel: Svitzer Murray Tug Boat

Vessel Type: ATD Tug

Scale: 50 : 1

Builder: Damen Shipyards 2413 ATD 70-ton bollard pull. Speed 13 knots

Length: 24.74

Beam: 12.63

Displacement: 503 T

Launch Date: 2008

This tug is modelled at a scale of 50:1 which gives the model a length of 480 mm and a beam of 260 millimetres. The model is features azimuth stern drives as per the prototype. This type of drive gives the tugs excellent manoeuvrability and enables them to move in any direction including sideways. This drive was scratch made by Lindsay.

Table 4 - Place 2

Model Owner: Lindsay Muxlow

Model Builder: Lindsay Muxlow

Vessel: Svitzer Macquarie Tug Boat

Vessel Type: 3315 ASDTug

Scale: 50 :1

Builder: Qianjin Shipyard- 80-ton bollard pull ahead and 75 tons astern

Speed: 13 knots

Length: 33M

Beam: 15M

Displacement: 630 Tons

Launch Date: 2012

This tug is modelled at a scale of 50:1 which gives the model a length of 660mm and a beam of 300 millimetres. The model is features azimuth stern drives as per the prototype. This type of drive gives the tugs excellent manoeuvrability and enables them to move in any direction including sideways. This drive was scratch made by Lindsay.

Table 4 - Place 3

Model Owner: Lindsay Muxlow

Model Builder: Lindsay Muxlow

Vessel: Bis Viridis

Vessel Type: Damen RSD Tug

Scale: 50:1

Builder: Damen Shipyards 2513 ASD 70-ton bollard pull. Speed 13 knots

Length: 25 m

Beam: 13 m

Displacement: 525 T

Launch Date: 16 Feb 2018

This tug is modelled at a scale of 50:1 which gives the model a length of 500 mm and a beam of 260 millimetres. The model is features azimuth stern drives as per the prototype. This type of drive gives the tugs excellent manoeuvrability and enables them to move in any direction including sideways. This type of drive gives the tugs excellent manoeuvrability and enables them to move in any direction including sideways. This drive was scratch made by Lindsay.

Table 4 - Place 4

Model Owner: Lindsay Muxlow

Model Builder: Lindsay Muxlow

Vessel: Smit Panther

Vessel Type: ASD Tug

Scale: 50 : 1

Builder: Damen Shipyards 3213 ASD 70-ton bollard pull. Speed 13 knots

Length: 32 m

Beam: 13 m

Displacement: 503 Tons

Launch Date: 2008

This tug is modelled at a scale of 50:1 which gives the model a length of 640 mm and a beam of 260 millimetres. The model is features azimuth stern drives as per the prototype. This type of drive gives the tugs excellent manoeuvrability and enables them to move in any direction including sideways. This drive was scratch made by Lindsay.